Immediately contact Online Customer Service
客服1Welcome to ZHEJIANG SENSTREN TECHNOLOGY CO., LTD. official website!
Top Categories :
Specifications Model:DASV08-30
Two-year warranty
DASV08-30 Spool, 3-Way
DESCRIPTION
A solenoid-operated, 3-way, direct-acting, spool-type, screw-in hydraulic directional valve.
OPERATION
When de-energized,DASV08-30 allows flow from ② to ① while blocking flow at ③ .When energized, the cartridge’s spool shifts to open from ③ to ②,while blocking flow out ① . While port ① may be fully pressurized, it is not intended to be used as the inlet.
Operation of Manual Override Option: To override, push button in and twist counterclockwise180° . The internal spring will push
the button out. In this position, the valve may be only partially shifted. To assure full override shift, pull the button out to its fullest
extension and hold it in this position.To return to normal valve function, push button in, twist clockwise 180° , and release. Override will be detented in this position.
FEATURES
● Continuous-duty rated solenoid.
● Hardened precision spool and cage for long life.
● Optional coil voltages and terminations.
● Efficient wet-armature construction.
● Cartridges are voltage interchangeable.
● All ports may be fully pressurized.
● Manual OverrideOptions.
● Optional waterproof E-Coils rated up to IP69K.
● Unitized, molded coil design.
● Fully guided spool.
● Compact size.
RATINGS
Operating Pressure:207 bar (3000 psi)
Flow:See Performance Chart
Internal Leakage:Port ③ (De-energized): 82 cc/minute (5 cu. in./minute) max.at 207 bar (3000 psi);Port ①(Energized): 164 cc/minute (10cu. in./minute) max. at 207 bar (3000 psi)
Temperature:-40℃ to 120℃,with Buna N seals
Coil Duty Rating:Continuous from 85% to 115% of nominal voltage
Response Time:First indication of change of state with 100% voltage supplied at 80% of nominal flow rating: Energized: 22 ms;
De-energized: 12 ms
Initial Coil Current Draw at 20℃ :
Standard Coil:1.2 amps at 12 VDC; 0.13 amps at 115 VAC (full wave rectified);
E-Coil:1.4 amps at 12 VDC; 0.7 amps at 24 VDC Minimum Pull-in Voltage:85% of nominal at 207 bar (3000 psi)
Fluids:Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 ssu)
Cavity: