DASV10-23 Poppet, 2-Way, Normally Open

DESCRIPTION

A solenoid-operated, two-way, poppet-type, normally open, screw-in, hydraulic cartridge valve.

OPERATION

When de-energized，DASV10-23 allows bidirectional flow from 2 to 1 .With the sensor option, the neutral sensor will signal OFF or
LOW.When energized, the valve’s poppet closes to block flow from 2 to 1 . In this mode,the cartridge allows free reverse flow from 1 to 2 after overcoming the solenoid force(requires 3.4 to 10.3 bar / 50 to 150 psi). With the sensor option, the neutral sensor
will signal ON or HIGH. Operation of Manual Override Option: To override, push and hold override button.

FEATURES

● Continuous-duty rated solenoid.
● Hardened seat for long life and low leakage.
● Optional coil voltages and terminations.
● Efficient wet-armature construction.
● Cartridges are voltage interchangeable.
● Manual OverrideOptions.
● Optional waterproof E-Coils rated up to IP69K.
● Unitized, molded coil design.
● Industry common cavity.

RATINGS

Operating Pressure:207 bar (3000 psi)
Proof Pressure：345 bar (5000 psi)
Flow:See Performance Chart
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 207 bar (3000 psi)
Temperature:-40℃ to 120℃，with Buna N seals
Coil Duty Rating： Continuous from 85% to 115% of nominal voltage
Response Time：First indication of change of state with 100% voltage supplied at 80% of nominal flow rating: Energized: 80msec.;
De-energized: 30 msec.
Response Time with Sensor: 158 ms pull-in, 57 ms drop-out Initial Coil Current Draw at 20℃ :
Standard Coil：Standard Coil: 1.67 amps at 12 VDC; 0.18 amps at 115 VAC (full wave rectified).
E-Coil：1.7 amps at 12 VDC; 0.85 amps at 24 VDC Minimum Pull-in Voltage:85% of nominal at 207 bar (3000 psi)
Fluids:Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 ssu)

Cavity：