DASV10-47A Spool, 4-Way, 3-Position, Tandem Center

DESCRIPTION

A solenoid-operated, four-way, three-position, direct-acting, spool-type, tandem center,screw-in hydraulic cartridge valve.

OPERATION

When de-energized，DASV10-47A blocks cylinder ports, while allowing flow from 3 to 1 . When coil 1(S1) is energized, flow is allowed from 3 to 2 , and from 4 to 1 . When coil 2(S2) is energized, flow is allowed from 3 to 4 , and from 2 to 1 .In circuits where work port flows are unequal due to cylinder ratios, the higher return flow should be directed to port 2 .
NOTE: While 1 may be fully pressurized, it is not intended for use as the valve’s inlet. Operaton of Manual Override Option: To override, push the knurled button to activate the coil 2 (S2) function, or pull the knob to activate the coil 1 (S1) function.

FEATURES

● Optional coil voltages and terminations.
● Efficient wet-armature construction.
● All ports may be fully pressurized.
● Cartridges are voltage interchangeable.
● Hardened precision spool and cage for long life.
● Continuous-duty rated solenoid.
● Manual OverrideOptions.
● Optional waterproof E-Coils rated up to IP69K.
● Unitized, molded coil design.

RATINGS

Operating Pressure: 240 bar (3500 psi)
Proof Pressure： 390 bar (5700 psi)
Flow: MAX 19 lpm (5 gpm)
Internal Leakage: 328 ml/minute (20 cu. in./minute) max. at 207 bar (3000 psi)
Temperature: -40℃ to 120℃，with Buna N seals
Coil Duty Rating：Continuous from 85% to 115% of nominal voltage
Response Time： First indication of change of state with 85% voltage supplied at100% of nominal flow rating: Energized: 100 ms;
De-energized: 50 ms.
Initial Coil Current Draw at 20℃ :
Standard Coil： Standard Coil: 1.67 amps at 12 VDC; 0.18 amps at 115 VAC (full wave rectified).
E-Coil： 1.7 amps at 12 VDC; 0.85 amps at 24 VDC
Minimum Pull-in Voltage:： 85% of nominal at 207 bar (3000 psi)
Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 ssu)

Cavity：