DATS10-36 Proportional Electric Reducing/Relieving

DESCRIPTION

A screw-in, cartridge-style, pilot-operated, spool-type reducing/relieving valve, which can be infinitely adjusted across a prescribed range using a variable electric input.Pressure output is proportional to DC current input. This valve is intended for use as a pressure limiting device in demanding applications.

OPERATION

With current applied to the valve coil,DATS10-36 blocks flow from 2 to 1 until sufficient pressure is present at 1 to open the pilot section by offsetting the electrically induced solenoid force. Increasing electric current will increase the control (reduced)pressure at 1. With no current applied to the solenoid, the valve will relieve pressure at 1 at approximately 6,9 bar (100 psi), regardless of pressure at 1 .The DATS10-36 has an optional manual override feature. This allows the valve to be set when the electric supply is lost. The manual setting is added to the electric setting,so when using the manual override feature to establish a minimum setting, care is required to prevent the system from becoming over-pressurized.

FEATURES

● Manual OverrideOptions.

● Industry common cavity.
● Deflated options

● Optional waterproof E-Coils rated up to IP69K.
● 12 and 24 volt coils standard.

RATINGS

Max Operating Pressure:241 bar (3500 psi)
Max Control Current：12 VDC Coil  1.10 A；24 VDC Coil  0.55 A
Relief Pressure Range from Zero to Maximum Control Current: A：6.9–207 bar (100–3000 psi)；
B：6.9–159 bar (100–2300 psi) C：6.9–117 bar (100–1700 psi) Rated Flow:57 lpm (15 gpm), △P=22.8 bar (330 psi), Cartridge only, 1 to 3 coil de-energized Max Pilot Flow:0.76 lpm (0.2 gpm) .
Temperature:-40℃～ 120℃ (-40 ～ 250 ℉ )，with Buna N seals
Fluids:Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 ssu)

Cavity: