DASV12-22Poppet, 2-Way, Normally Closed

DESCRIPTION

A solenoid-operated, 2-way, normally closed, poppet-type, screw-in hydraulic cartridge valve, designed to function as a load holding or blocking valve in applications requiring low internalleakage.

OPERATION

When de-energized，DASV12-22 acts as a check valve, allowing flow to pass from 1 to 2 , while blocking flow in the reverse direction. When energized, the poppet lifts to open the 2 to 1 flow path. In this mode, flow is also allowed from 1 to 2,Operation of Manual Override Option: To override, push button in,twist counter clockwise 180° and release. In this position, the valve will remain open.To return to normal operation, push button in, twist clockwise 180° and release.Override will be detented in this position.

FEATURES

● Continuous-duty rated solenoid.
● Hardened seat for long life and low leakage.
● Optional coil voltages and terminations.
● Efficient wet-armature construction.
● Cartridges are voltage interchangeable.
● Unitized, molded coil design.
● Manual OverrideOptions.
● Optional waterproof E-Coils rated up to IP69K.
● Cost effective cavity.

RATINGS

Operating Pressure:240 bar (3500 psi)
Proof Pressure：390 bar (5700 psi)
Flow:See Performance Chart
Internal Leakage: 0.15 cc/minute (3 drops/minute) max. at 240 bar (3500 psi)
Temperature:-40℃ to 120℃，with Buna N seals
Coil Duty Rating：Continuous from 85% to 115% of nominal voltage
Response Time：First indication of change of state with 100% voltage supplied at 80% of nominal flow rating: Energized: 40 ms;
De-energized: 80 ms
Initial Coil Current Draw at 20℃ :
Standard Coil：Standard Coil: 1.67 amps at 12 VDC; 0.18 amps at 115 VAC (full wave rectified).
E-Coil：1.7 amps at 12 VDC; 0.85 amps at 24 VDCMinimum
Pull-in Voltage:85% of nominal at 207 bar (3000 psi)
Fluids:Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 ssu).

Cavity: